(주)아이비티 | UPS AND CHARGER

HOME / PRODUCTS / BATTERY DEPARTMENT / UPS

FMC-2000 Series

Stable AC power supply applies a high frequency power conversion circuits
Enter Sruge, Sag, Outage, Spike, Dup, including protection from various types of commercial power failure
Based on the microprocessor to provide ease of application Digital Display Operation
Excellent transient characteristics (0↔100% during the rapidly changing ± 4%, within 20ms response time)
Checking the status display provides easy operation
Various state and alarm display features
Remote monitoring service over the Internet
(With built-in SNMP card UPS operational status monitoring via the Internet)
Computing equipment, communication equipment, medical equipment, testing equipment, control equipment, etc. designed for small and medium load capacity equipment that requires a High Quality Power

Division		Characteristic
Volume		15~20kVA	25~100kVA
Control Method	Rectifier / charger	SCR Full bridge phase control method
	The inverter section	High frequency PWM control scheme
Static S / W switching scheme		Fushun synchronous switching stage
Input	Voltage	3Ø 3W/4W 380/220V ± 10%
	Frequency	50Hz or 60Hz ± 5%
Output	Voltage	1Ø 2W 220V
	Frequency	50Hz or 60Hz ± 0.5%
	Voltage Stability	Within ± 2%
	Transient Voltage fluctuations	± 4% (when changing 0↔100%)
	Transient response time	Within 20ms
	Distortion	Less than 3% (linear load)
	Overload capacity	125%, 10 seconds
Synchronous Transfer Switch	Transfer time	Within 4ms
	Transfer conditions	Inverter Fault, Overload, low voltage direct current, for manual switching
Battery	Category	Sealed maintenance-free
	Voltage	216V(12V x 18 Cells)	240V(12V x 20 Cells)
Cooling system		Wind force cooled
Remote Monitoring		RS-232, RS-485 communication ports / SNMP Optional
Temperature conditions		0 - 40ºC
Humidity		Below 90%
Dimension (W x D x H, mm)	10~20kVA	700 x 800 x 1500
	25~30kVA	800 x 800 x 1830
	40~50kVA	1330 x 800 x 1830
	60~100kVA	1630 x 800 x 1830

It stabilized DC power supply to apply full-wave rectification circuit Thyristor
Compact design suitable for the switchgear
Fast response speed and high-precision stability
Tensioned Soft Start feature implementation
Automatic / manual Built-in charging
Built-in automatic charging of the battery charging current
Load voltage compensation device (SID) is optimal battery charging constant load and steady power supply available as built-in
Based on the microprocessor to provide ease of application Digital Display Operation
Various measurements and alarm status display provides
Communication ports (RS-232, RS-485)
MODBUS Protocol applies

Division		Characteristic
Volume		30, 50, 75, 100, 125, 150, 200, 250, 300, 400, 500, 600, 750, 1000
Rectification		Phase Control Thyristor Full bridge approach
AC input voltage		3Ø or 1Ø 220/380/440 / 480V ± 10%
Input Frequency		50Hz or 60Hz ± 5%
Efficiency		More than 80%
Rated output voltage		DC 24/48/110/125/220V
Charging way		Floating charge and equalizing charge
Rated output current		10 ~1000A
Current limits		90 ~ 100%
Output voltage stability		Within ± 2%
Cooling system		Natural wind-cooled or forced-cooled
Protection		Power and low-voltage protection, current limiting
Ripple (pulsation rate)		± 2%(RMS)
Temperature conditions		0 - 40ºC
Humidity		Below 90%
Charging way		Automatic charging and manual charging by the amount of current
Dimension (W x D x H, mm)	30~125A	600 x 800 x 1830
	150~250A	800 x 800 x 1830
	300~500A	1000 x 1000 x 1830
	600~1000A	1600 x 1000 x 1830